Right Hand Front Repair Procedure

1. Remove front door armrest base panel assembly.





A. Using a pry tool disengage the 5 claws and 3 clips disconnect the connector and remove the front door switch base assembly.

2. Remove the 3 pieces of felt from the switch base.





3. Release the 2 retaining tabs and remove the power door lock switch.





4. Remove the 11 screws.





5. Remove the power window switch.





6. Release the retaining tab and separate the trim panel from the finish plate.





7. Fully seat the retaining tab and install the trim panel to the NEW finish plate.





8. Install the power window switch assembly and the 11 screws.





9. Fully seat the two retaining tabs and install the power door lock switch assembly.








10. Apply new felt supplied with the finish plate.

Do not allow edges of felt to protrude.

11. Connect the connector engage the 5 claws and 3 clips and install the front door switch base.