Installation

CELLULAR COMMUNICATION: TELEPHONE AND GPS ANTENNA: INSTALLATION

1. INSTALL TELEPHONE AND GPS ANTENNA

(a) for Standard Roof:

(1) Engage the 2 claws to install the telephone and GPS antenna.

(2) Place the antenna cord in the cutout of the antenna nut.

Text in Illustration:

(3) Install the telephone and GPS antenna with the antenna nut.

Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

(b) for Glass Roof:

(1) Engage the 2 claws to install a new telephone and GPS antenna.

NOTICE:
* Be careful not to remove the red insulating paint on the fitting surface of the satellite radio antenna assembly when installing it.
* If the red insulating paint on the satellite radio antenna assembly is removed, replace it with a new one.
(2) Place the antenna cord in the cutout of the antenna nut.

Text in Illustration:

(3) Install the telephone and GPS antenna with the antenna nut.

Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

2. INSTALL TELEPHONE ANTENNA PROTECTOR

(a) Engage the 2 claws and install the telephone antenna protector.

(b) Connect the connector.

(c) Connect the 2 claws.

3. INSTALL ROOF HEADLINING ASSEMBLY

(a) Install the roof headlining assembly Installation.