Reassembly

SUSPENSION: REAR SHOCK ABSORBER WITH COIL SPRING: REASSEMBLY

REASSEMBLY
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.





1. INSTALL REAR COIL SPRING LH
(a) Using SST, compress the coil spring.
SST: 09727-30021
NOTE:
Do not use an impact wrench. It will damage the SST.

(b) SST Install the coil spring to the shock absorber. Fit the lower end of the coil spring into the recess of the spring seat of the shock absorber.
(c) Install the spring bumper, lower cup, cushion, collar, upper insulator, suspension support, cushion and washer to the shock absorber. Temporarily install a new lock nut.