Neutral Safety Switch: Adjustments

A761E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT

ADJUSTMENT

1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY





(a) Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.
(b) Align the groove with the neutral basic line.
(c) Hold the switch in position and tighten the bolt.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(d) After adjustment, perform the on-vehicle inspection On-Vehicle Inspection.