Crankshaft Main Bearing

Bearing inside diameter 66.986 to 67.000 mm (2.6372 to 2.6378 in.)
No. 1 and No. 5 Standard clearance 0.017 to 0.033 mm (0.0007 to 0.0013 in.)
Others Standard clearance 0.029 to 0.045 mm (0.0011 to 0.0018 in.)
No. 1 and No. 5 Maximum clearance 0.043 mm (0.0017 in.)
Others Maximum clearance 0.055 mm (0.0022 in.)

Crankshaft bearing cap bolt
Standard diameter 7.500 to 7.600 mm (0.2953 to 0.2992 in.)
Maximum diameter 7.20 mm (0.2835 in.)




Crankshaft bearing cap x Cylinder block
Install and uniformly tighten the 20 crankshaft bearing cap bolts.
2 progressive type 1st 27 Nm (275 kgf-cm, 20 ft.lbf)
2nd Turn 90°
Install and uniformly tighten the 10 crankshaft bearing cap bolts.
Others 49 Nm (500 kgf-cm, 36 ft.lbf)