Rear Airbag Sensor

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. CHECK REAR AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check Diagnosis System.
2. CHECK REAR AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
(a) Perform a diagnostic system check Diagnosis System.
(b) When the quarter panel of the vehicle or its periphery is damaged, check if there is any damage to the rear airbag sensor. If there are any defects as mentioned below, replace the rear airbag sensor with a new one:
- Cracks, dents or chips on the sensor housing.
- Cracks or other damage to the connector.
- Peeling off of the label or damage to the serial number.
CAUTION:
For removal and installation procedures of the rear airbag sensor, be sure to following the correct procedures.

3. CHECK REAR AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG DEPLOYED)
(a) Replace the rear airbag sensor.
CAUTION:
For removal and installation procedures of the rear airbag sensor, be sure to follow the correct procedures.
HINT: The rear airbag sensor on the impacted side should be replaced after the curtain shield airbag assembly has deployed.