Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR: REMOVAL

REMOVAL
CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Disassembly
3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL LH Disassembly
4. REMOVE FRONT DOOR WINDOW UPPER BRACKET GARNISH LH Disassembly
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Disassembly
6. REMOVE SIDE AIRBAG SENSOR ASSEMBLY LH





(a) Remove the 2 nuts and sensor.
(b) Disconnect the sensor connector.