Removal

3UZ-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL ROD: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE ACCELERATOR PEDAL ROD





(a) Disconnect the sensor connector.
(b) Remove the 2 bolts and pedal rod.
NOTICE:
- Do not drop or strike the accelerator pedal.
- Do not disassemble the accelerator pedal.