Removal

3UZ-FE EMISSION CONTROL: PCV VALVE: REMOVAL

REMOVAL

1. REMOVE V-BANK COVER
(a) Remove the 2 nuts and cover.
2. REMOVE NO. 1 AIR CLEANER INLET
(a) Remove the bolt and inlet.
3. REMOVE INTAKE AIR CONNECTOR PIPE
(a) Disconnect the air hose and ventilation hose.
(b) Loosen the 2 hose clamps.
(c) Remove the bolt and intake air connector.
4. REMOVE VENTILATION VALVE SUB-ASSEMBLY

(a) Disconnect the ventilation hose from the valve.
(b) Remove ventilation valve cover.