Removal

3UZ-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE V-BANK COVER Removal
3. REMOVE NO. 1 AIR CLEANER INLET Removal
4. REMOVE INTAKE AIR CONNECTOR PIPE Removal
5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR





(a) Disconnect the sensor connector.
(b) Remove the sensor.
(c) Remove the gasket from the sensor.