Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ANTENNA (for Rear Side): REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE WHEEL HUB ORNAMENT SUB-ASSEMBLY
(a) Remove the 10 bolts and ornament.
2. REMOVE REAR WHEEL
(a) Remove the 5 nuts and wheel.
3. REMOVE REAR TIRE PRESSURE WARNING ANTENNA LH

(a) Remove the rear wheel house liner.
(b) Disconnect the connector.