Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU (w/ Receiver): REMOVAL

REMOVAL

1. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE REAR CONSOLE UPPER PANEL GARNISH Removal
4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
5. REMOVE AIR CONDITIONING CONTROL Removal
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER Removal
7. CONFIRM RADIO RECEIVER ASSEMBLY SHIPMENT MODE SETTING Removal





8. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER
(a) Disconnect the 2 connectors.
(b) Remove the 2 bolts and ECU.