Installation

LIGHTING: TURN SIGNAL LIGHT SWITCH: INSTALLATION

INSTALLATION





1. INSTALL TURN SIGNAL SWITCH ASSEMBLY
(a) Install the switch with the 2 screws.
(b) Connect the connector.
2. INSTALL STEERING COLUMN COVER LOWER
3. INSTALL STEERING COLUMN COVER UPPER
4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.