Removal

LIGHTING: AFS ECU: REMOVAL

REMOVAL
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Removal
3. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal
4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Remove the 2 bolts and hood control lever.
5. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Removal





6. REMOVE AFS ECU
(a) Disconnect the ECU connector.
(b) Remove the 2 bolts and ECU.