Removal

LIGHTING: FOG LIGHT ASSEMBLY: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE RADIATOR GRILLE Removal
3. REMOVE FRONT FENDER LINER LH Removal
4. REMOVE FRONT FENDER LINER RH Removal
5. REMOVE FRONT BUMPER COVER Removal





6. REMOVE FOG LIGHT UNIT LH
(a) Remove the 3 bolts and fog light.
(b) Remove the screw and fog light bracket LH.