Installation

OTHER SYSTEM: CIGARETTE LIGHTER ASSEMBLY: INSTALLATION

INSTALLATION





1. INSTALL CIGARETTE LIGHTER ASSEMBLY
(a) Align the cigarette lighter with the cutout of the hole bezel, and install the lighter to the hole bezel. Then attach the ring nut to the lighter, and turn the ring nut to install it.
(b) Insert the socket cap and turn it clockwise to install.
2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
3. INSTALL REAR CONSOLE UPPER PANEL GARNISH Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.