Removal

3UZ-FE EXHAUST: EXHAUST MANIFOLD: REMOVAL

REMOVAL

1. REMOVE ENGINE ASSEMBLY
(a) Remove the engine from the vehicle Removal.
2. REMOVE HEATED OXYGEN SENSOR (for Bank 1)
(a) Using SST, remove the sensor.
SST: 09224-00010
3. REMOVE HEATED OXYGEN SENSOR (for Bank 2)
(a) Using SST, remove the sensor.
SST: 09224-00010
4. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR (for Bank 1)
(a) Remove the 4 bolts and insulator.
5. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR (for Bank 2)
(a) Remove the 4 bolts and insulator.
6. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 1)
(a) Remove the 8 nuts, manifold and gasket.
7. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 2)
(a) Remove the 8 nuts, manifold and gasket.