Installation

DOOR LOCK: TRANSMITTER BATTERY: INSTALLATION

INSTALLATION

1. INSTALL TRANSMITTER BATTERY





(a) Install the battery (lithium battery) with the positive (+) side up, as shown in the illustration.
- Be sure that the positive side and the negative side of the transmitter battery are matched up correctly.
- Be careful not to bend the transmitter battery electrode during insertion.
- Keep the transmitter case interior free of dust and oil.

(b) Using a screwdriver, install the cover with the 2 screws.
NOTE:
If the screws are loose, it may cause faulty contact between the battery (lithium battery) and the terminals.

2. INSTALL DOOR CONTROL TRANSMITTER ASSEMBLY
3. INSTALL TRANSMITTER HOUSING COVER