Cassette Tape cannot be Ejected

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: Cassette Tape cannot be Ejected

Cassette Tape cannot be Ejected

INSPECTION PROCEDURE

PROCEDURE

1. PRESS "EJECT" AND CHECK OPERATION
(a) Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.
OK:
Cassette tape is ejected.
NG -- REPLACE RADIO RECEIVER ASSEMBLY
OK -- Continue to next step.
2. CHECK CASSETTE TAPE
(a) Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.
OK:
No problems with cassette tape.
NG -- CASSETTE TAPE IS FAULTY
OK -- Continue to next step.
3. REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK
(a) Replace the cassette tape with a normal one and check if the same problem occurs again.
OK:
Malfunction disappears.
NG -- REPLACE RADIO RECEIVER ASSEMBLY
OK -- CASSETTE TAPE IS FAULTY