Removal

AUDIO / VISUAL: STEREO COMPONENT AMPLIFIER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR FLOOR FINISH PLATE Removal
3. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
4. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH Removal
5. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH Removal
6. REMOVE SPARE WHEEL COVER ASSEMBLY
7. REMOVE TOOL BOX COVER Removal
8. REMOVE LUGGAGE COMPARTMENT TRIM COVER SUB-ASSEMBLY REAR Removal
9. REMOVE TONNEAU COVER ASSEMBLY Removal
10. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LOWER Removal
11. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT Removal
12. REMOVE LUGGAGE COMPARTMENT TRAY BRACKET FRONT Removal
13. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY





(a) w/o Mark Levinson Sound System:
(1) Remove the 2 bolts and nut.
(2) Disconnect the 2 connectors, then remove the amplifier.





(b) w/ Mark Levinson Sound System:
(1) Remove the 2 bolts and nut.
(2) Disconnect the 2 connectors, then remove the amplifier.
14. REMOVE NO. 1 AMPLIFIER BRACKET





(a) Remove the 2 screws and bracket.
15. REMOVE NO. 2 AMPLIFIER BRACKET





(a) Remove the 2 screws and bracket.