Installation

INTERIOR: REAR DOOR SUNSHADE ASSEMBLY: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. INSTALL REAR CURTAIN SUB-ASSEMBLY LH





(a) for Standard Body:
Install the rear curtain.
(1) Connect the connector and attach the 3 clips to install the curtain.
(2) Install the 10 screws.





(b) for Long Body:
Install the rear curtain.
(1) Connect the connector and attach the 4 clips to install the curtain.
(2) Install the 10 screws.
2. INSTALL REAR DOOR NO. 2 FRAME GARNISH LH [1][2]Installation
3. INSTALL REAR DOOR FRAME GARNISH LH [1][2]Installation
4. INSTALL REAR DOOR TRIM COVER LH [1][2]Installation
5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH [1][2]Installation
6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH [1][2]Installation
7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH [1][2]Installation
8. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.