Removal

WINDSHIELD / WINDOWGLASS: REAR POWER WINDOW SWITCH: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the RH side.

1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY





(a) Using a screwdriver, detach the 2 clamps.
HINT: Tape the screwdriver tip before use.

(b) Detach the armrest base panel assembly.





(c) Disconnect the connector.





(d) Detach the 2 claws and remove the power window regulator switch assembly.