Removal

AA80E AUTOMATIC TRANSMISSION: TCM: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY
(a) Remove the 2 clips and air cleaner inlet cover.
4. REMOVE ENGINE ROOM SIDE COVER LH





5. REMOVE ENGINE ROOM ECU COVER
- Wipe off any water on or around the engine room ECU cover.
- Perform these procedures in a dry place away from rain, etc.
- Do not allow water to enter the ECM through its connector areas, screw areas, etc.

(a) Remove the 3 bolts and engine room ECU cover.





6. REMOVE TCM
(a) Disconnect the 4 connectors.
(b) Remove the 2 nuts and TCM.