Fuel Injector

Fuel injector (for Port injection)
Fuel leakage 1 drop or less per in 20 minutes

Standard injection volume:
84 to 102 cc (5.1 to 6.2 cu. in.) per 15 seconds
Difference between each injector: 18 cc (1.1 cu. in.) or less

(for Direct Injection): INSPECTION

NOTE:
This inspection aims at inspecting the fuel injectors for opens or shorts, because the fuel injectors of this vehicle are a high-pressure type and a fuel injection volume inspection cannot be performed.





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the injector assembly.