Installation

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

INSTALLATION





1. INSTALL STEERING PAD SWITCH ASSEMBLY
(a) Install the switch with the 4 screws.
(b) Connect the connector.
2. INSTALL STEERING PAD Installation
3. INSTALL SWITCH AND VOLUME CASE Installation
4. INSTALL NO. 2 STEERING WHEEL COVER LOWER Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSTALL COWL TOP VENTILATOR LOUVER RH Installation
7. INSPECT STEERING PAD Steering Pad
8. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

9. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.