Center Airbag Sensor Assembly

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check Diagnosis System.
2. CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check Diagnosis System.
3. CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
(a) Replace the center airbag sensor.
CAUTION:
For removal and installation procedures of the center airbag sensor, be sure to follow the correct procedure.
HINT: The center airbag sensor should be replaced after any of the airbags has deployed, as it has been subjected to the impact.