Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
5. REMOVE NO. 3 BOX PANEL Removal
6. REMOVE REAR UPPER CONSOLE PANEL Removal
7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
8. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal
9. REMOVE LOWER CONSOLE COVER Removal
10. REMOVE CONSOLE BOX ASSEMBLY Removal
11. REMOVE CENTER AIRBAG SENSOR ASSEMBLY





(a) Disconnect the holder (with connectors).
(b) Remove the 3 bolts and airbag sensor.