How To Proceed With Troubleshooting

SEAT BELT: POWER SHOULDER BELT ANCHORAGE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
- Use the following procedures to troubleshoot the power shoulder belt anchorage system.
- *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.

3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
(a) Use the Techstream to check if the CAN communication system is functioning normally.






B -- Go to CAN COMMUNICATION SYSTEM
A -- Continue to next step.

4. PROBLEM SYMPTOMS TABLE






B -- Go to step 6
A -- Continue to next step.

5. OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Data List / Active Test Power Shoulder Belt Anchorage System
(b) Terminals of ECU Power Shoulder Belt Anchorage System
NEXT -- Continue to next step.

6. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.

7. CONFIRMATION TEST
NEXT -- END