Installation

SEAT BELT: SHOULDER BELT ANCHORAGE SWITCH: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.





1. INSTALL HEIGHT ADJUSTABLE ANCHOR SWITCH
(a) Attach the 2 claws to install the switch.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY [1][2]Installation
3. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY [1][2]Installation
4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH [1][2]Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSTALL COWL TOP VENTILATOR LOUVER RH Installation
7. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.