Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (W/ Antenna): INSTALLATION

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY (W/ Antenna)
(a) Install the receiver with the nut.
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the receiver connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining for standard body Installation.
(b) Install the roof headlining for long body Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system Registration.