Removal

AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
4. REMOVE INSTRUMENT SIDE PANEL RH Removal
5. REMOVE NO. 2 INSTRUMENT CLUSTER MOULDING Removal
6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
7. REMOVE INSTRUMENT PANEL LOWER Removal
8. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal





10. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Disconnect the 3 connectors.
(b) Remove the screw and amplifier.