Removal

1UR-FSE INTAKE: INTAKE AIR CONTROL VALVE ACTUATOR: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal





4. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR
(a) Disconnect the intake air control valve actuator connector.
(b) Remove the nut and disconnect the actuator rod.
HINT: When loosening the nut, hold the actuator rod in place so that it does not move.

(c) Remove the 2 bolts. Then remove the intake air control valve actuator from the intake manifold.