Removal

1UR-FSE FUEL: FUEL PRESSURE SENSOR: REMOVAL

REMOVAL

1. PRECAUTION Removal
2. DISCHARGE FUEL SYSTEM PRESSURE
(a) Discharge fuel system pressure Service Precautions.
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

4. REMOVE INTAKE MANIFOLD
(a) Remove the intake manifold Removal.





5. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY





6. REMOVE FUEL PRESSURE SENSOR
(a) Disconnect the connector.
(b) Remove the fuel pressure sensor and gasket.