Removal

1UR-FSE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.





3. REMOVE ACCELERATOR PEDAL
(a) Disconnect the accelerator pedal sensor connector.
(b) Remove the 3 nuts and accelerator pedal.
NOTICE:
- Avoid physical shocks to the accelerator pedal.
- Do not disassemble the accelerator pedal assembly.