Section 5: Reset Memory and Linear Valve Offset Calibration

1. Select "Reset Memory" from the Utility menu screen.





2. Confirm the conditions listed on Techstream and press "Next".





3. Press "Next" to proceed.





4. Press "Exit".





5. Select "ECB Utility" from the Utility menu screen.





6. Select "Linear Valve Offset" from the ECB Utility screen and press "Next".





7. Press "Next" to proceed.





8. Press "Next" to proceed.





9. Confirm the conditions listed on Techstream and press "Next".





10. Press "Next" to proceed.





11. Techstream is now performing Linear Valve Offset.

DO NOT depress the brake pedal at this time.

NOTE

This process takes 120 seconds.





12. Press "Exit".

13. Clear all stored DTCs.

14. Test drive vehicle to confirm NO warning lights illuminate and there are NO abnormal brake concerns.

15. Verify the squawk/bark noise has been eliminated.