Installation

LIGHTING: HEIGHT CONTROL SENSOR: INSTALLATION

INSTALLATION





1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY
(a) Install the rear height control sensor with the 3 nuts.
Rear suspension member side - Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
Lower arm side - Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the connector.





2. INSTALL FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY
(a) Install the front height control sensor with the 3 nuts.
Rear suspension member side - Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
Lower arm side - Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the connector.
3. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT
4. PREPARATION FOR HEADLIGHT AIMING (Using a screen)
5. HEADLIGHT AIMING INSPECTION
6. HEADLIGHT AIMING ADJUSTMENT