Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER (for Front Side): INSTALLATION

INSTALLATION

1. INSTALL NO. 1 CLEARANCE WARNING BUZZER





(a) Attach the clamp and install the clearance warning buzzer.
(b) Connect the connector.
2. INSTALL RADIO RECEIVER ASSEMBLY Installation
3. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER Installation
4. INSTALL REAR CONSOLE PANEL UPPER Installation
5. INSTALL NO. 3 BOX PANEL Installation
6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INSTALL COWL TOP VENTILATOR LOUVER RH Installation
11. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.