Removal

1UR-FSE ENGINE MECHANICAL: REAR ENGINE MOUNTING: REMOVAL

REMOVAL

1. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY Removal
2. REMOVE ENGINE REAR MOUNTING MEMBER
(a) for 2WD:




(1) Remove the 4 bolts and disconnect the mounting member.




(2) Remove the 4 nuts and mounting member.
(b) for AWD:




(1) Remove the 4 bolts and disconnect the mounting member.
(2) Remove the 5 nuts, No. 3 mounting insulator and mounting member.
3. REMOVE NO. 1 ENGINE REAR MOUNTING INSULATOR





(a) for 2WD:
Remove the 4 bolts and engine mounting insulator.





(b) for AWD:
Remove the 2 bolts and mounting insulator.
4. REMOVE NO. 2 ENGINE REAR MOUNTING INSULATOR (for AWD)





(a) Remove the 2 bolts and mounting insulator.
5. REMOVE NO. 4 ENGINE REAR MOUNTING INSULATOR (for AWD)





(a) Remove the 2 bolts and mounting insulator.