Connecting Rod: Specifications

Connecting rod x Connecting rod cap
1st 40 Nm (408 kgf-cm, 30 ft.lbf)
2nd Turn 90° Nm (Turn 90° kgf-cm, Turn 90° ft.lbf)

Thrust clearance
Standard 0.15 to 0.55 mm (0.0059 to 0.0217 in.)
Maximum 0.70 mm (0.0276 in.)

Big end Inside diameter
Mark 1 56.000 to 56.006 mm (2.2047 to 2.2050 in.)
Mark 2 56.007 to 56.012 mm (2.2050 to 2.2052 in.)
Mark 3 56.013 to 56.018 mm (2.2052 to 2.2054 in.)
Mark 4 56.019 to 56.024 mm (2.2055 to 2.2057 in.)

Bend
Maximum 0.05 mm (0.0020 in.) per 100 mm (3.937 in.)
Twist
Maximum 0.15 mm (0.0059 in.) per 100 mm (3.937 in.)

Connecting rod bolt
Diameter
Standard 8.5 to 8.6 mm (0.335 to 0.339 in.)
Minimum 8.3 mm (0.327 in.)

Connecting rod bush
Inside diameter
Mark A 22.005 to 22.008 mm (0.8663 to 0.8665 in.)
Mark B 22.009 to 22.011 mm (0.8665 to 0.8666 in.)
Mark C 22.012 to 22.014 mm (0.8666 to 0.8667 in.)

Oil clearance
Standard 0.005 to 0.011 mm (0.0002 to 0.0004 in.)
Maximum 0.03 mm (0.0012 in.)