Removal

1UR-FSE COOLING: COOLING FAN ECU: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
4. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal
5. REMOVE NO. 1 AIR CLEANER INLET Removal
6. REMOVE COOLING FAN ECU
(a) Disconnect the 3 connectors.





(b) Remove the 2 screws and ECU.