Removal

PARKING BRAKE: ELECTRIC PARKING BRAKE ECU: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
4. REMOVE REAR FLOOR FINISH PLATE Removal
5. REMOVE DECK TRIM SIDE BOARD LH Removal
6. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Removal
7. REMOVE ELECTRIC PARKING BRAKE ECU

(a) Disconnect the 2 connectors.
(b) Remove the 2 nuts and seat belt control ECU.