Removal

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR CLOSER SWITCH: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP





(a) Using a screwdriver, detach the 3 claws.
HINT: Tape the screwdriver tip before use.





(b) Remove the 2 screws and assist grip.
2. REMOVE DOOR INSIDE HANDLE BEZEL





(a) Using a screwdriver, detach the 4 claws and remove the bezel.
HINT: Tape the screwdriver tip before use.

3. REMOVE SWITCH BEZEL (W/ Power Trunk Lid System)





(a) Using a screwdriver, detach the 2 claws and remove the bezel.
HINT: Tape the screwdriver tip before use.

4. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY





(a) Using a screwdriver, detach the 2 claws and remove the courtesy light.
HINT: Tape the screwdriver tip before use.

(b) Disconnect the connector.
5. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH
(a) Detach the 2 claws and remove the rear combination light service cover LH.
6. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH
(a) Detach the 2 claws and remove the rear combination light service cover RH.
7. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH





(a) Using a clip remover, remove the 3 clips and cover.
8. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH





(a) Using a clip remover, remove the 3 clips and cover.
9. REMOVE BACK DOOR TRIM COVER





(a) Using a clip remover, remove the 4 clips.
(b) Remove the 10 clips and cover.
10. REMOVE LUGGAGE COMPARTMENT DOOR CLOSER SWITCH





(a) Disconnect the connector.
(b) Remove the 2 screws and door closer switch.