Installation

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR CLOSER SWITCH: INSTALLATION

INSTALLATION

1. INSTALL LUGGAGE COMPARTMENT DOOR CLOSER SWITCH





(a) Connect the connector.
(b) Install the door closer switch with the 2 screws.
2. INSTALL BACK DOOR TRIM COVER





(a) Install the cover with the 10 clips.
(b) Attach the 4 clips.
3. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH





(a) Install the cover with the 3 clips.
4. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH





(a) Install the cover with the 3 clips.
5. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH
(a) Attach the 3 claws to install the cover.
6. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH
(a) Attach the 3 claws to install the cover.
7. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY





(a) Connect the connector.
(b) Install the courtesy light with the claws.
8. INSTALL SWITCH BEZEL (W/ Power Trunk Lid System)





(a) Attach the 2 claws to install the switch bezel.
9. INSTALL DOOR INSIDE HANDLE BEZEL





(a) Attach the 4 claws to install the handle bezel.
10. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP





(a) Install the assist grip with the 2 screws.





(b) Attach the 3 claws to install the cover.
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.