Installation

GARAGE DOOR OPENER: GARAGE DOOR OPENER TRANSMITTER: INSTALLATION

INSTALLATION





1. INSTALL GARAGE DOOR OPENER TRANSMITTER
(a) Install the garage door opener transmitter with the 2 screws.
(b) Connect the connector.
2. INSTALL MAP LIGHT ASSEMBLY
(a) Install the map light for the standard body Installation.
(b) Install the map light for the long body Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INSTALL COWL TOP VENTILATOR LOUVER RH Installation
5. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.