Removal

THEFT DETERRENT: SECURITY INDICATOR LIGHT ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH [1][2]Removal
4. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY [1][2]Removal
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH [1][2]Removal
6. REMOVE INDICATOR LIGHT ASSEMBLY [1][2]Removal
7. REMOVE INDICATOR LIGHT BRACKET [1][2]Removal
8. REMOVE INDICATOR LIGHT COVER [1][2]Removal