B2020

PRE-COLLISION: PRE-COLLISION SYSTEM: B2015: Open in Right Side Upper MOS

DTC B2015 - Open in Right Side Upper MOS

DTC B2016 - Open in Right Side Lower MOS

DTC B2020 - Open in Left Side Upper MOS

DTC B2021 - Open in Left Side Lower MOS

DTC B2025 - Right Side Current Detection Circuit Malfunction Hi

DTC B2026 - Right Side Current Detection Circuit Malfunction Lo

DTC B2027 - Right Side Over-Current Malfunction

DTC B2030 - Left Side Current Detection Circuit Malfunction Hi

DTC B2031 - Left Side Current Detection Circuit Malfunction Lo

DTC B2032 - Left Side Over-Current Malfunction

DTC B2035 - Power Supply Relay Adherence Malfunction

DTC B2040 - EEPROM Malfunction

DTC B2041 - Fall of Raised Voltage

DTC B2043 - Fall of B+ Voltage

DTC B2047 - Seat Belt Control ECU Inner Circuit Malfunction

DESCRIPTION

The DTCs above are output during the seat belt control ECU's self diagnosis.
When DTC B2015 or B2016 is detected, DTCs B2026, and B2027 will not be detected.
When DTC B2020 or B2021 is detected, DTCs B2031, and B2032 will not be detected.






INSPECTION PROCEDURE

PROCEDURE

1. CHECK FOR DTC
(a) Enter the following menus: Body Electrical / Pre-Collision 1 / Trouble Code /
(b) Select "Clear" and clear the data.
(c) Recheck for DTCs.
OK:
DTC B2015 to B2047 are not output.
NG -- REPLACE SEAT BELT CONTROL ECU
OK -- USE SIMULATION METHOD TO CHECK