Removal

2GR-FSE ENGINE MECHANICAL: ENGINE REAR OIL SEAL: REMOVAL

REMOVAL

1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY
HINT:
Removal.

2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY Removal
3. REMOVE ENGINE REAR OIL SEAL





(a) Using a knife, cut through the oil seal lip.
(b) Using a screwdriver with its tip taped, pry out the oil seal.
HINT:
Tape the screwdriver tip before use.
NOTE:
After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.