Installation

A960E AUTOMATIC TRANSMISSION: SPEED SENSOR: INSTALLATION

INSTALLATION

1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2)





(a) Coat a new O-ring with ATF and install it to the transmission revolution.
(b) Install the transmission revolution sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the transmission revolution sensor connector.
2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)





(a) Coat a new O-ring with ATF and install it to the transmission revolution.
(b) Install the transmission revolution sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the transmission revolution sensor connector.
3. INSTALL NO. 2 ENGINE UNDER COVER