Installation

METER: STEERING PAD SWITCH: INSTALLATION

INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY





(a) Engage the 4 pins.
(b) Install the steering pad switch assembly with the 2 screws.





(c) Connect the 2 connectors and engage the clamp.
2. INSTALL STEERING PAD Installation
3. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation
4. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT STEERING PAD Installation
7. INSPECT SRS WARNING LIGHT
Diagnosis System