Installation

BRAKE CONTROL: REAR SPEED SENSOR: INSTALLATION

INSTALLATION

1. INSTALL REAR SPEED SENSOR





(a) Install the rear speed sensor with the bolt.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTE:
Prevent foreign matter from attaching to the sensor tip.

(b) Connect the speed sensor connector.
2. INSTALL REAR WHEEL
(a) Install the rear wheel.
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)
3. INSPECT SPEED SENSOR SIGNAL
Test Mode Procedure